wxMediaCtrl
wxMediaCtrl is a class for displaying types of
media, such as videos, audio files, natively through native codecs.
wxMediaCtrl uses native backends to render media, for example on Windows
there is a ActiveMovie/DirectShow backend, and on Macintosh there is a
QuickTime backend.
See also
Derived from
Include files
<wx/mediactrl.h>
Members
Rendering media
Depending upon the backend, wxMediaCtrl can render
and display pretty much any kind of media that the native system can -
such as an image, mpeg video, or mp3 (without license restrictions -
since it relies on native system calls that may not technically
have mp3 decoding available, for example, it falls outside the
realm of licensing restrictions).
For general operation, all you need to do is call
wxMediaCtrl::Load to load the file
you want to render, catch the EVT_MEDIA_LOADED event,
and then call
wxMediaCtrl::Play
to show the video/audio of the media in that event.
More complex operations are generally more heavily dependant on the
capabilities of the backend. For example, QuickTime cannot set
the playback rate of certain streaming media - while DirectShow is
slightly more flexible in that regard.
Operation
When wxMediaCtrl plays a file, it plays until the stop position
is reached (currently the end of the file/stream). Right before
it hits the end of the stream, it fires off a EVT_MEDIA_STOP
event to its parent window, at which point the event handler
can choose to veto the event, preventing the stream from actually
stopping.
Example:
//connect to the media event
this->Connect(wxMY_ID, wxEVT_MEDIA_STOP, (wxObjectEventFunction)
(wxEventFunction)(wxMediaEventFunction) &MyFrame::OnMediaStop);
//...
void MyFrame::OnMediaStop(const wxMediaEvent& evt)
{
if(bUserWantsToSeek)
{
m_mediactrl->SetPosition(
m_mediactrl->GetDuration() << 1
);
evt.Veto();
}
}
When wxMediaCtrl stops, either by the EVT_MEDIA_STOP not being
vetoed, or by manually calling
wxMediaCtrl::Stop, where it actually
stops is not at the beginning, rather, but at the beginning of
the stream. That is, when it stops and play is called, playback
is gauranteed to start at the beginning of the media. This is
because some streams are not seekable, and when stop is called
on them they return to the beginning, thus wxMediaCtrl tries
to keep consistant for all types of media.
Note that when changing the state of the media through Play()
and other methods, the media may not actually be in the
wxMEDIASTATE_PLAYING, for example. If you are relying on the
media being in certain state catch the event relevant to the state.
See
wxMediaEvent for the kinds of events
that you can catch.
Video size
By default, wxMediaCtrl will scale the size of the video to the
requested amount passed to either it's constructor or Create().
After calling Load or performing an equivilant operation, you
can subsequently obtain the "real" size of the video (if there
is any) by calling GetBestSize(). Note that the actual result
on the display will be slightly different when ShowPlayerControls
is activated and the actual video size will be less then
specified due to the extra controls provided by the native toolkit.
In addition, the backend may modify GetBestSize() to include the
size of the extra controls - so if you want the real size of the
video just disable ShowPlayerControls().
The idea with setting GetBestSize to the size of the video is
that GetBestSize is a wxWindow-derived function that is called
when sizers on a window recalculate. What this means is that
if you use sizers by default the video will show in it's
original size without any extra assistance needed from the user.
Player controls
Normally, when you use wxMediaCtrl it is just a window for the video to
play in. However, some toolkits have their own media player interface.
For example, QuickTime generally has a bar below the video with a slider.
A special feature available to wxMediaCtrl, you can use the toolkit's interface instead of
making your own by using the
ShowPlayerControls()
function. There are several options for the flags parameter, with
the two general flags being wxMEDIACTRLPLAYERCONTROLS_NONE which turns off
the native interface, and wxMEDIACTRLPLAYERCONTROLS_DEFAULT which lets
wxMediaCtrl decide what native controls on the interface. Be sure to review
the caveats outlined in
Video size before
doing so.
Choosing a backend
Generally, you should almost certainly leave this part up to
wxMediaCtrl - but if you need a certain backend for a particular
reason, such as QuickTime for playing .mov files, all you need
to do to choose a specific backend is to pass the
name of the backend class to
wxMediaCtrl::Create.
The following are valid backend identifiers -
| wxMEDIABACKEND_DIRECTSHOW |
Use ActiveMovie/DirectShow. Uses the native ActiveMovie
(I.E. DirectShow) control. Default backend on Windows and
supported by nearly all Windows versions, even some
Windows CE versions. May display a windows media player
logo while inactive.
|
| wxMEDIABACKEND_QUICKTIME | Use QuickTime. Mac Only.
WARNING: May not working correctly embedded in a wxNotebook.
|
| wxMEDIABACKEND_GSTREAMER | Use GStreamer. Unix Only. Requires GStreamer 0.8 along
with at the very least the xvimagesink, xoverlay, and
gst-play modules of gstreamer to function. You need the correct
modules to play the relavant files, for example the mad module
to play mp3s, etc.
|
| wxMEDIABACKEND_WMP10 | Uses Windows Media Player 10 (Windows only) - works on mobile
machines with Windows Media Player 10 and desktop machines with
either Windows Media Player 9 or 10
|
Note that other backends such as wxMEDIABACKEND_MCI can now be
found at wxCode.
Creating a backend
Creating a backend for wxMediaCtrl is a rather simple process. Simply derive
from wxMediaBackendCommonBase and implement the methods you want. The methods
in wxMediaBackend correspond to those in wxMediaCtrl except for CreateControl
which does the actual creation of the control, in cases where a custom control
is not needed you may simply call wxControl::Create.
You need to make sure to use the DECLARE_CLASS and IMPLEMENT_CLASS macros.
The only real tricky part is that you need to make sure the file in compiled
in, which if there are just backends in there will not happen and you may need
to use a force link hack (see http://www.wxwidgets.org/wiki/index.php/RTTI).
This is a rather simple example of how to create a backend in the
wxActiveXContainer documentation.
wxMediaCtrl::wxMediaCtrl
wxMediaCtrl()
Default constructor - you must call Create before calling any other methods
of wxMediaCtrl.
wxMediaCtrl(
wxWindow* parent,
wxWindowID id,
const wxString& fileName = wxT(""),
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
long style = 0,
const wxString& szBackend = wxT(""),
const wxValidator& validator = wxDefaultValidator,
const wxString& name = wxPanelNameStr
)
Constructor that calls
Create. You may prefer to call
Create directly to check to see if wxMediaCtrl is available on the system.
- parent
parent of this control. Must not be NULL.
- id
id to use for events
- fileName
If not empty, the path of a file to open.
- pos
Position to put control at.
- size
Size to put the control at and to stretch movie to.
- style
Optional styles.
- szBackend
Name of backend you want to use, leave blank to make
wxMediaCtrl figure it out.
- validator
validator to use.
- name
Window name.
wxMediaCtrl::Create
bool Create(
wxWindow* parent,
wxWindowID id,
const wxString& fileName = wxT(""),
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
long style = 0,
const wxString& szBackend = wxT(""),
const wxValidator& validator = wxDefaultValidator,
const wxString& name = wxPanelNameStr
)
Creates this control. Returns false if it can't load the movie located at fileName or it cannot load one of its native backends.
If you specify a file to open via fileName and you don't specify a backend to use, wxMediaCtrl tries each of its backends until one that can render the path referred to by fileName can be found.
- parent
parent of this control. Must not be NULL.
- id
id to use for events
- fileName
If not empty, the path of a file to open.
- pos
Position to put control at.
- size
Size to put the control at and to stretch movie to.
- style
Optional styles.
- szBackend
Name of backend you want to use, leave blank to make
wxMediaCtrl figure it out.
- validator
validator to use.
- name
Window name.
wxMediaCtrl::GetBestSize
Obtains the best size relative to the original/natural size of the
video, if there is any. See
Video size
for more information.
wxMediaCtrl::GetPlaybackRate
double GetPlaybackrate()
Obtains the playback rate, or speed of the media. 1.0 represents normal
speed, while 2.0 represents twice the normal speed of the media, for
example. Not supported on the GStreamer (Unix) backend.
Returns 0 on failure.
wxMediaCtrl::GetVolume
double GetVolume()
Gets the volume of the media from a 0.0 to 1.0 range. Note that due to rounding
and other errors this may not be the exact value sent to SetVolume.
wxMediaCtrl::GetState
wxMediaCtrlState GetState()
Obtains the state the playback of the media is in -
| wxMEDIASTATE_STOPPED | The movie has stopped.
|
| wxMEDIASTATE_PAUSED | The movie is paused.
|
| wxMEDIASTATE_PLAYING | The movie is currently playing.
|
wxMediaCtrl::Length
wxFileOffset Length()
Obtains the length - the total amount of time the movie has in milliseconds.
wxMediaCtrl::Load
Loads the file that fileName refers to. Returns false if loading fails.
wxMediaCtrl::Load
bool Load(
const wxURI& uri)
Loads the location that uri refers to. Note that this is very implementation-dependant, although HTTP URI/URLs are generally supported, for example. Returns false if loading fails.
wxMediaCtrl::Load
Loads the location that uri refers to with the proxy proxy. Not implemented on most backends so it should be called with caution. Returns false if loading fails.
wxMediaCtrl::LoadURI
bool LoadURI(
const wxURI& uri)
Same as
Load. Kept for wxPython compatability.
wxMediaCtrl::LoadURIWithProxy
bool LoadURIWithProxy(
const wxURI& uri,
const wxURI& proxy)
Same as
Load. Kept for wxPython compatability.
wxMediaCtrl::Pause
bool Pause()
Pauses playback of the movie.
wxMediaCtrl::Play
bool Play()
Resumes playback of the movie.
wxMediaCtrl::Seek
wxFileOffset Seek(wxFileOffset where, wxSeekMode mode)
Seeks to a position within the movie.
wxMediaCtrl::SetPlaybackRate
bool SetPlaybackRate(double dRate)
Sets the playback rate, or speed of the media, to that referred by dRate.
1.0 represents normal speed, while 2.0 represents twice the normal
speed of the media, for example. Not supported on the GStreamer (Unix) backend.
Returns true if successful.
wxMediaCtrl::SetVolume
bool SetVolume(double dVolume)
Sets the volume of the media from a 0.0 to 1.0 range to that referred
by dVolume. 1.0 represents full volume, while 0.5
represents half (50 percent) volume, for example. Note that this may not be
exact due to conversion and rounding errors, although setting the volume to
full or none is always exact. Returns true if successful.
wxMediaCtrl::ShowPlayerControls
bool ShowPlayerControls(wxMediaCtrlPlayerControls flags = wxMEDIACTRLPLAYERCONTROLS_DEFAULT)
A special feature to wxMediaCtrl. Applications using native toolkits such as
QuickTime usually have a scrollbar, play button, and more provided to
them by the toolkit. By default wxMediaCtrl does not do this. However, on
the directshow and quicktime backends you can show or hide the native controls
provided by the underlying toolkit at will using ShowPlayerControls. Simply
calling the function with default parameters tells wxMediaCtrl to use the
default controls provided by the toolkit. The function takes a
wxMediaCtrlPlayerControls enumeration as follows:
| wxMEDIACTRLPLAYERCONTROLS_NONE | No controls. return wxMediaCtrl to it's default state.
|
| wxMEDIACTRLPLAYERCONTROLS_STEP | Step controls like fastfoward, step one frame etc.
|
| wxMEDIACTRLPLAYERCONTROLS_VOLUME | Volume controls like the speaker icon, volume slider, etc.
|
| wxMEDIACTRLPLAYERCONTROLS_DEFAULT | Default controls for the toolkit. Currently a typedef for wxMEDIACTRLPLAYERCONTROLS_STEP and wxMEDIACTRLPLAYERCONTROLS_VOLUME.
|
For more see
Player controls. Currently
only implemented on the QuickTime and DirectShow backends. The function
returns true on success.
wxMediaCtrl::Stop
bool Stop()
Stops the media.
See
Operation for an overview of how
stopping works.
wxMediaCtrl::Tell
wxFileOffset Tell()
Obtains the current position in time within the movie in milliseconds.
